Help Plumbing licensed gas fitter at work on a gas hose box

Cooktops, ovens, heaters and gas lines

Gas Plumber Sydney: Licensed Gas Fitting, Certified Every Job

Licensed & Insured · NSW Lic. 489072C · 5.0★ across 105 Google Reviews

Licensed

NSW Lic. 489072C

Insured

$10M public liability

Same-day

Response across Sydney

5-star rated

105 Google reviews

Get a fast quote — we'll call you back today

2 fields. 60 seconds. Same-day response across Sydney.

If you can smell gas right now, turn off the supply at the meter, open the windows and call us from outside on (02) 9538 7878. For everything else, Help Plumbing is a licensed gas plumber Sydney homes and businesses book for cooktops, ovens, heaters, bayonet points and gas pipework, working from our base in Earlwood. Every job is done to AS/NZS 5601 and comes with a Compliance Certificate, as NSW law requires. You get a fixed price before we start.

If you smell gas

  • Don't touch electrical switches or use anything with a flame.
  • Open doors and windows.
  • Turn off the gas at the meter if it's safe to do so.
  • Leave the property, then call us on (02) 9538 7878 from outside.

If the smell is strong or anyone feels unwell, call 000 first. We prioritise gas calls over other work. If you suspect leaking gas, Sydney homes should follow these steps before anything else. Once everyone is out and the gas is off, a gas leak plumber Sydney homes can call will find and fix the leak.

Gas leak detection and repairs

Gas leak detection Sydney homes need starts with a pressure test of the line. It tells us whether gas is escaping and roughly where. Then we check each fitting, hose and appliance connection until we find it.

Common gas leak repairs are a failed fitting, a perished hose or a worn appliance connection. Every gas leak repair Sydney homes get from us is pressure tested again and certified before we leave. That's the standard any licensed gas plumber Sydney residents hire should meet. If the leak turns out to be water, not gas, see our leak detection service.

Gas appliance installation services

Our gas appliance installation services are the everyday side of being a gas plumber. Sydney homes book us for cooktops, ovens, heaters, instant hot water and gas log fires. We can supply the appliance or connect one you've bought, and every gas installation Sydney homes get from us is tested, commissioned and certified. In NSW, only a licensed gas fitter can connect a gas appliance.

Gas cooktop installation and replacement

Gas cooktop installation Sydney kitchens need takes a pressure test, the right connection and a flame check before we hand it over. A gas cooktop replacement Sydney homeowners book is usually a straight swap, unless the new cooktop needs the gas point moved.

If a kitchen renovation moves the cooktop, the gas point has to move too. We fit in with the kitchen installer's schedule, so the gas is ready when the benchtop is. It's a small job in a big project, but it's still one for a licensed gas plumber. Sydney renovations run smoother when that part is booked early.

Gas oven installation

Gas oven installation needs the right connection and a commissioning check, so the burners light and run cleanly. As gas oven installers, we test the oven after fitting and certify the work. Professional gas oven installation matters most with wall ovens, where the connection sits behind cabinetry.

Gas heater installation and servicing

Gas heater installation covers fixed gas heaters and bayonet points for portable heaters. If you want to install gas heater points in more than one room, we plan the pipework so each one gets enough supply. For a larger gas heating installation, we check the meter and pipe size can handle the extra load first.

Before winter is the busy time for any gas plumber. Sydney nights get cold enough that heaters come on for the first time in months, and that's when faults show up. We're based in Earlwood, so a gas heater service Earlwood homes book is a short trip for us.

Gas hot water

We install and repair gas hot water too. Our hot water repairs page covers storage and continuous flow units.

Gas repairs Sydney homes call us for

We repair gas appliances, fittings and pipework. When people call a gas plumber, Sydney homes usually have one of these faults:

  • Pilot light keeps going out. Usually a faulty thermocouple or sensor. It's an inexpensive repair, and we normally fix it in one visit.
  • Yellow flame instead of blue. The appliance isn't burning cleanly and needs a service. Turn it off until it's checked.
  • Appliance won't light. Often an ignition fault or a gas supply problem.
  • Defects from a building inspection. We fix the defect and issue the certificate.

As a gas repair plumber, we find the fault before replacing anything. Our gas fitting repair services come with the same fixed price and certificate as an installation.

Gas line plumbing and new connections

Gas line plumbing covers new runs, extensions and repairs to the pipe between the meter and your appliances. A gas line repair starts with a pressure test to find the fault. Running a new line is work for a licensed gas plumber. Sydney homes adding a cooktop or heater point need the pipework sized for the extra load.

For gas meter installation, Sydney homes arrange the meter through their gas retailer, and the network fits it. We do everything after the meter: the pipework, the test and the certificate.

Gas plumber Sydney landlords and strata managers book

Landlords and strata managers book us as their gas plumber. Sydney rental and common property appliances get a safety check: we pressure test the lines, check each appliance and document everything for the property manager, so there's a record if questions come up later.

How a gas job runs

Our gas plumber Sydney service runs in four steps:

  1. Inspect. We look over the gas lines, appliances and meter, and pressure test the system.
  2. Quote. You get a fixed price, and we start only when you say yes.
  3. Do the work. A licensed gas fitter completes it to AS/NZS 5601, then commissions and tunes any new appliance.
  4. Certify. You get a Compliance Certificate, which NSW law and your insurer require for gas work on the property.

Gas fitter Sydney areas we cover

We're a gas plumber Sydney wide, working from Earlwood:

  • Inner West and St George. Closest to our base, including Earlwood itself.
  • Parramatta. A gas plumber Parramatta homes can book, and a gas fitter Parramatta businesses can call for commercial work.
  • Blacktown and Penrith. A gas plumber Blacktown households can book, and a gas fitter Penrith homes can call for heaters and cooktops. We also handle commercial gas plumbing Penrith businesses need.
  • St Marys. St Marys is on our list, so a gas heater service North St Marys homes need is close by.
  • Hills District. A gas plumber Hills District homes can book for cooktops, ovens and heaters.
  • Eastern Suburbs, Ryde and the Blue Mountains. Covered on the same number.

Our plumbers hold NSW Plumbing Licence 489072C, and we carry $10 million public liability insurance. For everything else we do, see our home page. To book a gas plumber, Sydney homes can call (02) 9538 7878.

Suburbs we service for Gas Plumbing

All 97 suburbs — same-day response, upfront pricing.

Get a free quote for gas plumbing

Same-day service available, with typical 1-hour response on urgent plumbing issues. We aim to respond to all enquiries within 1–2 business hours.

Or call directly: (02) 9538 7878

Gas plumber Sydney FAQs

Are you licensed for gas work?

Yes. Our team includes licensed gas fitters, and every job comes with a Compliance Certificate. Ask any gas plumber Sydney homes are thinking of hiring for the same.

Do I need a plumber, gas fitter or both for a new cooktop?

You need a licensed gas fitter for anything that connects to gas. Our team includes licensed gas fitters, so the same visit covers the connection, the test and the certificate. That's what to expect from any gas plumber Sydney homes book.

Can you install a cooktop I've already bought?

Yes. We connect it, test it and certify it, and upgrade the gas line if it needs it.

How often should gas appliances be checked?

We recommend a safety check every 2 years: a pressure test, a leak check and a service of each appliance.

What does a Compliance Certificate prove?

That the work was done by a licensed gas fitter and meets AS/NZS 5601. Keep it with your house papers, because insurers and buyers can ask for it.

Call now — (02) 9538 7878